EF-XD-01 1/4″ Water Tube Disinfection

Specification

Materail: Food grade POM

Seal rubber material:EPDM

Metal screw material:SUS304

Maximum inlet water pressure: 230 Psi

Temperature range :0 to 60 °C

Test life:water hammer 1.2Mpa water cycle+EPDM membrane seal with one hundred thousand times

*Push-fit technology

*Quick disconnection without the need for tools

*High chemical resistance

*Not suitable for air or insert gases

Instruction：

Firstly install the fitting in the upstream pipeline of the water filtration systems that needs disinfection;

Secondly turn on the water flow and continuously flush it (at least 10mins) until the filtered water is clear and odorless;

Thirdly take a small amount of filtered water and try drinking a bit, after confirm there is no residue then we can start normally using the filtration system.

This product is for disinfection inside the water filtration system, so it is forbidden to directly drink the water that flowing out of this fitting;

This product is highly susceptible to moisture, so it is forbidden to open it before usage;

Please put the product in dark & cool place, meanwhile it needs to be sealed and out of reach of children.

Size range

1/4 inch , 5/16 inch , 3/8 inch ,1/2 inch, 6mm, 8mm, 10mm, 12mm, 15mm, 22mm  quick fittings for option 

RELATED CATALOGUE